PS-2
All rights reserved.
Priority Safety Services
"Your Safety Is Our Priority"
Priority Safety Services
"Your Safety Is Our Priority"
Features
  • LEL or PPM detection ranges available formany gases
  • 2 alarm levels
  • Stand alone system
  • Input voltages: 115 VAC standard, 24 VDC or 48 VDC (optional)
  • Audible and visual alarms
  • Compact design
  • Simple installation
  • AC version equipped with power cord
  • Relay contacts rated 12A @ 115 VAC
  • Low maintenance

Industry Applications
  • Battery storage locations
  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment plants
  • Degreasers
  • Gas, telephone, & electric utilities
  • Manufacturing facilities
  • Steel
  • Automotive
  • HVAC
    A perfect low cost solution for hydrogen detection in battery rooms, or for LEL or
    PPM level detection of a variety of flammable or solvent vapors in general
    industry.

    The Model PS 2 is a multipurpose gas monitor utilizing a MOS (metal oxide
    sensor) for long lasting and low maintenance detection at the LEL or PPM levels
    of many gases or vapors. The PS 2 has two alarm levels for increasing gas or
    vapor levels, at the PPM level for detection of many solvent vapors, or for LEL
    level detection of flammable vapors. Inquire at the factory for your specific
    requirement. Each alarm level activates a 12 amp relay inside the unit, and
    terminals are provided for wiring the relay to activate an external alarming device
    or some other device such as a ventilation fan.

    This stand alone unit is housed in a durable plastic enclosure with flanges
    provided for wall mounting and is designed with easy access wiring hubs on the
    bottom of the unit. The front of the PS 2 contains three lights; Pilot, Alarm 1, and
    Alarm 2. An internal audible alarm (85 db) is also built in which activates in a gas
    alarm condition.

    The standard PS 2 is supplied with the gas sensor located on the end of a 30 foot
    cable (other cable distances are also available). Each unit is powered by 115
    VAC standard or 24 VDC as standard (48 VDC versions optional), and the AC
    version comes complete with a 6' power cord.